The Eurotherm 32h8i indicator offers accurate indication and alarming of temperature and process measurements. Process interlocks, including over temperature furnace limits, are implemented using a relay output.
The emphasis is on simplicity and ease of use. A simple 'QuickStart' code can be used to configure all the essential functions, including input sensor type, measurement range, control options and alarms - making 'Out of the Box' operation truly achievable.
The indicator can have up to 4 software alarms, which include absolute high & low and rate of change (rising or falling), that are auto or manual latching, non-latching or event only, and up to four conditions can be assigned to one output.
The Digital Input can function as alarm acknowledge, keylock, alarm inhibit, freeze display.
- 5 digit display
- Colour changing display (Upper display: Red, Green, or change during alarm)
- Quick and easy commissioning.
- Easy, comprehensive operator information.
- 4 Software Alarms.
- IP65 (NEMA 4X) rated front panel.
- Scrolling text messages (via iTools PC software and lead, not included)
Sensor Input: Thermocouple, RTD, millivolts
(Optionally: Linear milliamps, Linear volts, with adaptors, not included) Thermocouple: Type B, C, J, K, L, N, R, S, T
RTD: 2 or 3-wire PT100
millivolts: 0 - 80mV
Optionally: Linear milliamps: 0 - 20mA, 4 -20mA with 2.49 Ohm external shunt (not included)
Optionally: Linear Volts: 0 - 10V with 100K Ohm/806 Ohm external divider module (not included)Digital Input: 1x, Open >500Ω, closed <150Ω, for logic/contact signal.
(Additional Digital Input optional.)Outputs: 1x Change-over Relay - Form C (normally open & normally closed) (Min 100mA@12vdc, max 2A@264Vac resistive).
(Additional change-over relay optional extra.)Transmitter Power Supply: 24Vdc, >28mA <33mA, 264Vac double insulated
Supply Voltage: 100 to 240Vac, -15%, +10%, 48 to 62 Hz, max 6W
Dimensions (Overall): 96 x 48 x 101mm (WxHxD)
Depth behind panel: 90mm
Panel Mounting: 1/8 DIN horizontal, 92 x 45mm (WxH) panel cut-out
Other models are also available, with options including: low voltage supply, analogue retransmission, RS-485 etc digital comms, strain gauge input, FM Alarm standard compliance. Please contact us for a price.Appearance may vary from image shown.These units are part of a wider range, see the whole range. 
TMS Europe Ltd is a UKAS accredited calibration laboratory No.0461, as defined in our Schedule of Accreditation. As a UK manufacturer we're a member of Made in Britain.